TOBI QUAD MICRO DRIVE
Due to the special geometry of the drive concept it was possible to combine features like axial alignment, maximum contact surface, self holding of the screw as well the optimization of the fatigue strength of the driver bits. All these supports e.g. working over head with one hand as well as the automated fastening process. Reduce tool wear, take advantage of versatility and test the system.
TOBI QUAD SELF HOLD
During the insertion of the driver bit in the screw recess, the system will be axially aligned. This is e.g. an advantage for an automatic screw feed with robots and for critical applications where the screw- or nut thread musn’t be damaged. The converging surfaces ensure that the screws can’t drop out of the tobi driver bits until they are tightened. Especially for working with one hand on a ladder over head.
TOBI QUAD MICRO
Each TOBI screw head profile is compatible with a corresponding hexalobular socket or AW screwdriver bit of the same dimension in case of repair.